We are one of the leading FRP Threaded Rods Suppliers and Exporters in India. Our Fiberglass Threaded Rods are FRP Pultruded profiles which are used for Power and Energy industries for Electrical insulations.

Available in M8 to M 30 Length is more then 1 meter.

Exported 1.25 meter Length Class H – FRP Epoxy Threaded rods.

Characteristics of Fibre Reinforced Polymers Threaded Rods

Higher Mechanical and Electrical Strength.

Non- Metallic, Non- Conductive, Non- Corrosive.

Available in Polyester / Epoxy resin with Class F 155 °C, Class H 180 °C

Profile are available in Epoxy resin only for Insulating purpose, because of Characteristics of non metallic, non conductive, non corrosive it is mainly use in Cable Trays, Chemicals, Ladders, Refineries industries, (where SS and MS Nut bolt are use). Threaded rods & Nuts are mainly use in Dry Types Transformers, Cable Trays for electrical insulations purpose.

FRP THREADED ROD are use in Dry type / Power / transformers, Switchgear, Chocks, Cable trays, power resistor, for electrical insulation application for Winding applications as insulation properties.

Main application of FRP Pultruded profiles are in Electrical Insulated for Electrical Industries like Transformers, Switchgears, tap Changers, Insulators, Composite insulators, Silicon insulator, Polymer Insulators, Chocks, Grounding Register,

Technical Specification
Specification of FRP Epoxy Pultruded Profiles

Properties	Unit	Specification
Specific Gravity		2.0 + 0.2
Water Absorption	% By Weight	0.1 (Max)
Tensile Strength	MPa	750 (Min)
Cross Breaking Strength	MPa	900 (Min)
Compressive Strength (Axial)	MPa	400 (Min)
Impact Strength	KJ/M2	400 (Min)
Electrical Strength, Min. (Proof Voltage At 900C In Oil) Radial Axial	Kv/mm Kv/25mm	10 (Min) 50 (Min)
Insulation Resistance	OHMS	1010 (Min)
Dissipatin Factor At 50 Hz		0.02 (Max)
Relative Permittivity		5 (Max)
Comparative Tracking Index		600 (Min)
Temperature Class F	0C	1550C

Temperature Class H 180°C is available on request.

Properties
Made with Epoxy / Polyester resin, Class F ( 155 °C ) having higher mechanical and electrical strength, used as insulation in electrical industries like Transformers, Switchgear Insulator, tap Changer etc. Temperature Class H 180 °C Available on request or demand